Chapter 7 Wireless LAN
LTE5366 Series User’s Guide
77
The following table describes the labels in this screen.
7.4.1 More AP Edit
Use this screen to edit an SSID profile. Click the
Edit
icon next to an SSID in the
More AP
screen. The
following screen displays.
Figure 43
Configuration > Network > Wireless LAN > More AP: Edit
The following table describes the labels in this screen.
Table 24 Configuration > Network > Wireless LAN > More AP
LABEL
DESCRIPTION
#
This is the index number of each SSID profile.
Status
This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
SSID
An SSID profile is the set of parameters relating to one of the LTE5366’s BSSs. The SSID (Service Set
IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans
for an AP to associate with, this is the name that is broadcast and seen in the wireless client
utility.
Security
This field indicates the security mode of the SSID profile.
Edit
Click the
Edit
icon to configure the SSID profile.
Table 25 Configuration > Network > Wireless LAN > More AP: Edit
LABEL
DESCRIPTION
Active
Select this to activate the SSID profile.
Name (SSID)
The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated.
Enter a descriptive name (up to 32 printable characters found on a typical English language
keyboard) for the wireless LAN.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain
the SSID through scanning using a site survey tool.
