Chapter 19 NAS
LTE5366 Series User’s Guide
138
Figure 89
Configuration > Application > NAS > FTP
The following table describes the labels in this screen.
19.3.1 Example of Accessing Your Shared Files From a Computer
You can use Windows Explorer or FTP to access the USB storage devices connected to the LTE5366.
Use Windows Explorer to Share Files
Open Windows Explorer to access the connected USB device using either Windows Explorer browser or
by browsing to your workgroup.
Note: This example shows you how to use Microsoft’s Windows 7 to browse your shared files.
Refer to your operating system’s documentation for how to browse your file structure.
Table 61 Configuration > Application > NAS > FTP
LABEL
DESCRIPTION
FTP Setting
FTP
Select to enable or disable the FTP server on the LTE5366 for file sharing using FTP.
FTP Port
You may change the server port number for FTP if needed, however you must use the same
port number in order to use that service for file sharing.
FTP Max Connection
per IP
Select the maximum number of FTP connections that are allowed from a single IP address.
FTP MAX Client
Select the maximum number of FTP clients that are allowed to connect to the FTP server.
PASV Mode
Select
Enable
to activate passive mode. In passive mode the client sends a PASV
Command to the FTP server. The FTP server opens a short port on the local machine and
then responds to the client. After the client receives the message, it can establish a file
transfer connection to this port.
Client Support UTF8
Set whether the FTP clients support UTF-8 encoding.
Apply
Click
Apply
to save your changes back to the LTE5366.
Cancel
Click
Cancel
to begin configuring this screen afresh.
