Chapter 2 Introducing the Web Configurator
LTE5366 Series User’s Guide
25
The following table describes the sub-menus.
Table 7 Navigation Panel
LINK
TAB
FUNCTION
Status
This screen shows the LTE5366’s general device, system and interface status
information. Use this screen to access the summary statistics tables.
Monitor
Log
View Log
Use this screen to view the list of activities recorded by your LTE5366.
Log Setting
Use this screen to configure which logs to display.
DHCP Table
DHCP Table
Use this screen to view current DHCP client information.
ARP Table
ARP Table
Use this screen to view the ARP table. It displays the IP and MAC address of
each DHCP connection.
Packet Statistics
Packet
Statistics
Use this screen to view port status and packet specific statistics.
WLAN Station
Status
Association
List
Use this screen to view the wireless stations that are currently associated to the
LTE5366’s 2.4GHz wireless LAN.
LTE Modem
Status
LTE Modem
Status
Use this screen to view the detailed information about the LTE module, cellular
interface, and SIM card. You can also view the LTE connection status.
Configuration
Network
WAN
Management
WAN
This screen allows you to configure ISP parameters, WAN IP address
assignment, and DNS servers.
Network Scan Use this screen to specify the type of the mobile network to which the LTE5366
is connected and how you want the LTE5366 to connect to an available
mobile network.
IPv6
Use this screen to configure the LTE5366’s IPv6 settings.
PIN
Management
Use this screen to enable PIN code authentication and enter the PIN code.
Wireless LAN
General
Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
More AP
Use this screen to configure multiple BSSs on the LTE5366.
MAC Filter
Use the MAC filter screen to allow or deny wireless stations based on their MAC
addresses from connecting to the LTE5366.
Advanced
This screen allows you to configure advanced wireless LAN settings.
QoS
Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM QoS).
WMM QoS allows you to prioritize wireless traffic according to the delivery
requirements of individual services.
WPS
Use this screen to configure the WPS settings.
WPS Station
Use this screen to add a wireless station using WPS.
Scheduling
Use this screen to schedule the times the Wireless LAN is enabled.
WDS
Use this screen to enable and configure the WDS settings.
LAN
IP
Use this screen to configure LAN IP address and subnet mask.
DHCP Server
General
Use this screen to enable the LTE5366’s DHCP server.
Advanced
Use this screen to assign IP addresses to specific individual computers based
on their MAC addresses and to have DNS servers assigned by the DHCP server.
Client List
Use this screen to view information related to your DHCP status.
