Chapter 1 Introduction
LTE5366 Series User’s Guide
19
Figure 4
Rear Panel
1.6 Resetting the LTE5366
If you forget your password or IP address, or you cannot access the Web Configurator, you will need to
use the
RESET
button at the back of the LTE5366 to reload the factory-default configuration file. This
means that you will lose all configurations that you had previously saved, the password will be reset to
“1234” (see
) and the IP address will be reset to “192.168.1.1”.
1.6.1 How to Use the RESET Button
1
Make sure the power LED is on.
2
Press the
RESET
button for two seconds to restart/reboot the LTE5366.
3
Press the
RESET
button for longer than five seconds to set the LTE5366 back to its factory-default
configurations.
1.7 Wall Mounting
You may need screw anchors if mounting on a concrete or brick wall.
Table 3 Wall Mounting Information
Distance between holes
90mm
