ZyXEL Communications IES-1248-71, User Manual

Page: 306 / 464

Chapter 46 Alarm Commands
IES-1248-71/73 User’s Guide
306
The source is where the alarm originated. This is either a DSL port number, one of the
Ethernet ports (enet 1 or 2), or “eqpt” for the system itself.
46.4 Alarm Port Show Command
Syntax:
ras> alarm port show [<severity>|all]
This command displays port alarm severity level thresholds. The system reports an alarm on a
port if the alarm has a severity equal to or higher than the port’s threshold.
Figure 149 Alarm Show Command Example
ras> alarm tablelist
no alarm condition facility snmp syslog severity
clearable
--- ------ ------------------------- --------- ---- ------ -------- ------
---
1 dsl ( 5000)line_up local1 V V info -
2 dsl ( 5001)line_down local1 V V minor V
3 dsl ( 5002)ad_perf_lol_thresh local1 V V info V
4 dsl ( 5003)ad_perf_lof_thresh local1 V V info V
5 dsl ( 5004)ad_perf_los_thresh local1 V V info V
6 dsl ( 5005)ad_perf_lop_thresh local1 V V info V
7 dsl ( 5006)ad_perf_es_thresh local1 V V info V
8 dsl ( 5007)ad_perf_rate_chg local1 V V info V
9 dsl ( 5008)ad_perf_ses_thresh local1 V V info V
10 dsl ( 5009)ad_perf_uas_thresh local1 V V info V
11 dsl ( 5010)ad_atuc_loftrap local1 V V minor -
12 dsl ( 5011)ad_atuc_lostrap local1 V V minor -
13 dsl ( 5012)ad_atur_loftrap local1 V V minor -
14 dsl ( 5013)ad_atur_lostrap local1 V V minor -
15 dsl ( 5014)ad_atur_lprtrap local1 V V minor -
16 eqpt ( 10000)vol_err local1 V V critical -
17 eqpt ( 10001)temp_err local1 V V critical -
18 eqpt ( 10002)fan_err local1 V V critical -
19 eqpt ( 10003)hw_rtc_fail local1 V V critical -
Press any key to continue, 'e' to exit, 'n' for nopause