ZyXEL Communications IES-1248-71, User Manual

Page: 316 / 464

Chapter 47 DHCP Commands
IES-1248-71/73 User’s Guide
316
where
This command adds the specified information for the relay agent.
47.3 DHCP Relay Option 82 (Agent Information) Sub-option 2
(Remote ID)
Use the following commands to configure the DHCP relay Option 82 (agent information)
feature, sub-option 2. This feature applies regardless of whether or not the DHCP relay is on.
47.3.1 Option 82 Sub-option 2 Enable Command
Syntax:
ras> switch dhcprelay opt82sub2 enable
This command turns on the DHCP relay agent information (Option 82, Sub-option 2) feature.
47.3.2 Option 82 Sub-option 2 Disable Command
Syntax:
ras> switch dhcprelay opt82sub2 disable
This command turns off the DHCP relay agent information (Option 82, Sub-option 2) feature.
47.3.3 Option 82 Sub-option 2 Set Command
Syntax:
ras> switch dhcprelay opt82sub2 set [<relay info>]
where
This command adds the specified information for the relay agent.
[<relay info>] =
Up to 23 ASCII characters of additional information for the
IES-1248 to add to the DHCP requests that it relays to a DHCP
server.
Examples of information you could add would be the name of
the IES-1248 or the ISP.
[<relay info>] =
Up to 23 ASCII characters of additional information for the
IES-1248 to add to the DHCP requests that it relays to a DHCP
server.
Examples of information you could add would be the name of
the IES-1248 or the ISP.