ZyXEL Communications IES-1248-71, User Manual

Page: 311 / 464

Chapter 46 Alarm Commands
IES-1248-71/73 User’s Guide
311
46.9 Alarm History Clear Command
Syntax:
ras> alarm history clear [<alarm>|all <condition>|all] <severity>
This command removes historic alarm entries by alarm category, alarm condition or severity.
The following example removes the historic minor level alarms for all alarm categories, and
all conditions.
46.10 Alarm XEdit Command
Syntax:
ras> alarm xedit <alarm>|all <cond>|<condcode> <severity> <fac>
<target>[,<target>] [clearable]
where
This command sets the severity level of an alarm(s) and where the system is to send the
alarm(s).
"
Use the
alarm tablelist
command to display alarm setting details.
Figure 154 Alarm History Clear Command Example
ras> alarm history clear minor
<cond> = all|condition
This is the text description for the condition
under which the alarm applies. Use the
alarm tablelist
to
find alarm conditions.
<condcode > =
The condition code is the number of a specific alarm message.
Use the
alarm tablelist
to find alarm condition codes.
<severity> =
Specify an alarm severity level (critical, major, minor or info)
for this alarm. Critical alarms are the most severe, major alarms
are the second most severe, minor alarms are the third most
severe and info alarms are the least severe.
<fac> =
The log facility (
local1~local7
) has the device log the
syslog messages to a particular file in the syslog server. Set this
if this entry is for sending alarms to a syslog server. See your
syslog program’s documentation for details.
<target> = snmp|syslog|all
The type of alarm messages that the
device is to send (SNMP, syslog or all). You can specify more
than one separated by commas.
[clearable] = clearable|unclearable
This sets whether or not the
alarm clear command removes the alarm from the system.