ZyXEL Communications IES-1248-71, User Manual

Page: 267 / 464

Chapter 41 Diagnostic
IES-1248-71/73 User’s Guide
267
41.2 Log Format
The common format of the system logs is:
<item no> <time> <process> <type>
<log message>
.
41.2.1 Log Messages
The following table lists and describes the system log messages.
Table 86 Log Format
LABEL DESCRIPTION
<item no>
This is the index number of the log entry.
<time>
This is the time and date when the log was created.
<process>
This is the process that created the log.
<type>
This identifies what kind of log it is. "INFO" identifies an information log.
"WARN" identifies a warning log.
<log message>
This is the log’s detailed information (see Table 87 on page 267 ).
Table 87 Log Messages
LOG MESSAGE TYPE DESCRIPTION
ADSL <port> Link
Up(SN=<seq no>): <ds
rate>/<us rate>!
or
ADSL Link Info: NM:<ds
NM>/<us NM>! INFO
An ADSL port established a connection.
<port> - port number
<seq no> - sequence number of the connection
<ds rate> - downstream rate
<us rate> - upstream rate
<us NM> - upstream noise margin
<ds NM> - downstream noise margin
ADSL <port> Link
Down(SN=<seq no>)! WARN
An ADSL port lost its connection.
<port> - port number
<seq no> - sequence number of the connection
Session Begin! INFO
A console, telnet or FTP session has begun (see the
<process> field for the type of session).
Session End! INFO
A console telnet or FTP session has terminated (see the
<process> field for the type of session).
Incorrect Password! WARN
Someone attempted to use the wrong password to start a
console, telnet or FTP session (see the <process> field for
the type of session).
Received Firmware
Checksum Error! WARN
A checksum error was detected during an attempted FTP
firmware upload.
Received Firmware Size
too large! WARN
The file size was too large with an attempted FTP firmware
upload.
Received Firmware
Invalid! WARN
Someone attempted to upload a firmware file with a wrong
identity via FTP.
Received File <file>! INFO
A file was uploaded to the IES-1248 by FTP.
<file> - received file’s name