ZyXEL Communications IES-1248-71, User Manual

Page: 367 / 464

Chapter 55 ADSL Commands
IES-1248-71/73 User’s Guide
367
55.1.5 ADSL Profile Set Command
Syntax:
ras> adsl profile set <profile> <fast|interleave[=<up delay>,<down delay>]>
<up max rate> <down max rate>
[<up target margin> <up min margin> <up max margin> <up min rate>
<down target margin> <down min margin> <down max margin> <down min rate>
<up down-shift margin> <up up-shift margin>
<down down-shift margin> <down up-shift margin>]
where
<profile> =
The descriptive name for the profile.
<fast|interleav
e[=<up
delay>,<down
delay>]> =
The latency mode. With interleave, you must also define the
upstream and downstream delay (1-255 ms). It is recommended
that you configure the same delay for both upstream and
downstream.
<up max rate> =
The maximum ADSL upstream transmission rate (32-3000
Kbps).
<down max rate> =
The maximum ADSL downstream transmission rate (32-25000
Kbps).
<up target
margin> =
The target ADSL upstream signal/noise margin (0-31db).
<up min margin> =
The minimum acceptable ADSL upstream signal/noise margin
(0-31db).
<up max margin> =
The maximum acceptable ADSL upstream signal/noise margin
(0-31db).
<up min rate> =
The minimum ADSL upstream transmission rate (32-3000
Kbps).
<down target
margin> =
The target ADSL downstream signal/noise margin (0-31db).
<down min
margin> =
The minimum acceptable ADSL downstream signal/noise
margin (0-31db).
<down max
margin> =
The maximum acceptable ADSL downstream signal/noise
margin (0-31db).
<down min rate> =
The minimum ADSL downstream transmission rate (32-25000
Kbps).
<up down shift
margin> =
The upstream down shift noise margin (0~31 in dB).
<up up shift
margin> =
The upstream up shift noise margin (0~31 in dB).
<down down
shift margin> =
The downstream down shift noise margin (0~31 in dB).
<down up shift
margin>] =
The downstream up shift noise margin (0~31 in dB).