ZyXEL Communications G-210H, User Manual

Page: 58 / 79

ZyXEL G-210H User’s Guide
58 Appendix B
Figure 38 Windows XP: Wireless (network) properties: Association
The following table describes the labels in this screen.
Table 20 Windows XP: Wireless (network) properties: Association
LABEL DESCRIPTION
Network name
(SSID)
This field displays the SSID (Service Set IDentifier) of each wireless network.
Network
Authentication
This field automatically shows the authentication method ( Share , Open , WPA,
WPA2 or WPA-PSK, WPA2-PSK ) used by the selected network.
Data Encryption This field automatically shows the encryption type ( AES , TKIP , WEP or Disable )
used by the selected network.
Network Key Enter the pre-shared key or WEP key.
The values for the keys must be set up exactly the same on all wireless devices in
the same wireless LAN.
Confirm network
key
Enter the key again for confirmation.
Key index
(advanced)
Select a default WEP key to use for data encryption.
This field is available only when the network use
WEP encryption method and the
The key is provided for me automatically check box is not selected.
The key is
provided for me
automatically
If this check box is selected, the wireless AP assigns the G-210H a key.
This is a
computer-to-
computer (ad hoc)
network; wireless
access points are
not used
If this check box is selected, you are connecting to another computer directly.
OK Click OK to save your changes.
Cancel Click Cancel to leave this screen without saving any changes you may have made.