ZyXEL Communications G-210H, User Manual

Page: 35 / 79

ZyXEL G-210H User’s Guide
Chapter 4 Wireless Station Mode Configuration 35
4.3 The Site Survey Screen
Use the Site Survey screen to scan for and connect to a wireless network automatically.
Figure 17 Station Mode: Site Survey
The following table describes the labels in this screen.
Link Quality The status bar shows the quality of wireless connection. This refers to the
percentage of packets transmitted successfully. If there are too many wireless
stations in a wireless network, collisions may occur which could result in a loss of
messages even though you have high signal strength.
Noise Level This field displays the noise level that the G-210H is detecting while linked with the
connected AP.
Table 3 Station Mode: Link Info (continued)
LABEL DESCRIPTION
Table 4 Station Mode: Site Survey
LABEL DESCRIPTION
Available Network
List
Click a column heading to sort the entries.
, denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
, denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
or denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
. denotes that the wireless device is in Ad-Hoc mode but the wireless
security is deactivated.
SSID This field displays the SSID (Service Set IDentifier) of each wireless device.