ZyXEL Communications Dimension ES-3148, User Manual, Page: 213 / 282

Dimension ES-3148 User’s Guide
Chapter 31 Introducing the Commands 211
https timeout
Resets the session timeout to
the default of 300 seconds.
multi-login
Disables another administrator
from logging into Telnet or the
CLI.
cluster
Disables cluster management
on the switch.
cluster member <mac-address>
Removes the cluster member.
mvr <vlan-id>
Disables MVR on the switch.
wfq fe-spq
Sets the switch to use WFQ to
service all queues for the 10/
100Mbps Ethernet port.
vlan <1-4094>
Enters the VLAN configuration
mode. See Section 31.9.5 on
page 221 for more information.
vlan-type <802.1q|port-based>
Specifies the VLAN type.
igmp-snooping
Enables IGMP snooping.
unknown-multicast-
frame
<drop|flooding>
Sets how to treat traffic from
unknown multicast group.
igmp-filtering
Enables IGMP filtering on the
switch.
profile <name>
start-address <ip>
end-address <ip>
Sets the range of multicast
address(es) in a profile.
interface port-channel <port-
list>
Enables a port or a list of ports
for configuration. See Section
31.9.4 on page 218 for more
details.
spq
Sets the queuing method to
SPQ (Strictly Priority Queuing).
wfq
Sets the queuing method to
WFQ (Weighted Fair Queuing).
fe-spq <Q0-Q7>
Sets the switch to use SPQ to
service the subsequent
queue(s) after and including the
specified queue for the 10/100
Mbps Ethernet ports.
ip route <ip> <mask>
<next-hop-ip>
Creates a static route.
<ip> <mask>
<next-hop-ip>
[metric <metric>]
[name <name>]
[inactive]
Sets the metric of a static route
or deactivates a static route.
name-server <ip>
Sets the IP address of a domain
name server.
Table 69 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION