ZyXEL Communications Dimension ES-3148, User Manual, Page: 209 / 282

Dimension ES-3148 User’s Guide
Chapter 31 Introducing the Commands 207
mvr
DIsplays all MVR (Multicast VLAN
Registration) settings.
<vlan-id>
DIsplays specified MVR information.
igmp-flush
Removes all IGMP information.
mac-flush
Clears the MAC address table.
<port-num>
Removes all learned MAC address on the
specified port(s).
erase running-config
Resets to the factory default settings.
baudrate <1|2|3|4|5>
Changes the console port speed. Choices
are 1 (9600), 2 (19200), 3(38400), 4
(57600) and 5 (115200).
boot config <index>
Restarts the system with the specified
configuration file.
reload config <index>
Restarts the system and use the specified
configuration file.
write memory
Saves current configuration to the
configuration file the switch is currently
using.
<index>
Saves current configuration to the
specified configuration file on the switch.
copy tftp flash <ip>
<remote-file>
Restores firmware via TFTP.
tftp config <index>
<ip> <remote-file>
Restores configuration with the specified
filename from the specified TFTP server.
running-config tftp
<ip> <remote-file>
Backs up running configuration to the
specified TFTP server with the specified
file name.
ping <ip|host-name>
Sends Ping request to an Ethernet
device.
[vlan <vlan-
id>][..]
Sends Ping request to an Ethernet device
in the specified VLAN(s).
help
Displays command help information.
traceroute <ip|host-name> [in-
band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
help
Displays command help information.
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
[command </>]
Connects to an SSH server with the
specified SSH version and addition
commands to be executed on the server.
Table 68 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION