ZyXEL Communications Dimension ES-3148, User Manual, Page: 186 / 282

Dimension ES-3148 User’s Guide
184 Chapter 26 Maintenance
26.7.3 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP
clients.
26.7.4 FTP Restrictions
FTP will not work when:
• FTP service is disabled in the Service Access Control screen..
• The IP address(es) in the Remote Management screen does not match the client IP
address. If it does not match, the switch will disconnect the Telnet session immediately.
General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the server
for anonymous access. Anonymous logins will work only if your ISP or service
administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Configuration and firmware files should be transferred in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).