ZyXEL Communications Dimension ES-3148, User Manual

Page: 211 / 282

Dimension ES-3148 User’s Guide
Chapter 31 Introducing the Commands 209
lacp
Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
trunk <T1|T2|T3|T4|T5|T
6>
Disables the specified trunk
group.
<T1|T2|T3|T4|T5|T
6> lacp
Disables LACP in the specified
trunk group.
<T1|T2|T3|T4|T5|T
6> interface
<port-list>
Removes ports from the
specified trunk group.
bcp-transparency
Disables Bridge Control
Protocol (BCP) transparency.
storm-control
Disables broadcast storm
control.
bandwidth-control
Disable bandwidth control on
the switch.
vlan1q gvrp
Disables GVRP on the switch.
port-isolation
Disables port isolation.
spanning-tree
Disables STP.
<port-list>
Disables STP on listed ports.
timesync
Disables timeserver settings.
radius-server
Disables the use of
authentication from the RADIUS
server.
port-access-
authenticator
Disables port authentication on
the switch.
<port-list>
Disables authentication on the
listed ports.
<port-list>
reauthenticate
Disables the re-authentication
mechanism on the listed port(s).
port-security
Disables port security on the
switch.
<port-list>
Disables port security on the
specified ports.
<port-list> learn
inactive
Enables MAC address learning
on the specified ports.
snmp-server trap-destination
<ip>
Disables sending of SNMP
traps to a station.
logins <name>
Disables login access to the
specified name.
service-control telnet
Disables telnet access to the
switch.
ftp
Disables FTP access to the
switch.
Table 69 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION