ZyXEL Communications Dimension ES-3148, User Manual, Page: 220 / 282

Dimension ES-3148 User’s Guide
218 Chapter 31 Introducing the Commands
31.9.4 interface port-channel Commands
The following table lists the
interface port-channel
commands in configuration mode.
Use these commands to configure the ports.
Table 70 interface port-channel Commands
COMMAND DESCRIPTION
interface
port-channel
<port-list>
Enables a port or a list of ports
for configuration.
weight <wt1> <wt2>
... <wt8>
Sets the interface to use WFQ
weighting. A weight value of one
to eight is given to each variable
from wt 1 to wt 8.
egress set <port-
list>
Sets the outgoing traffic port list
for a port-based VLAN.
igmp-immediate-leave
Enables IGMP immediate leave
on the port.
igmp-filtering
profile <name>
Sets the IGMP filtering profile
for this port.
igmp-group-limited
Limits the number of multicast
groups.
igmp-group-limited
number <number>
Sets the number of multicast
groups this port is allowed to
join.
igmp-querier-mode
<auto|fixed|edge>
Sets the IGMP querier mode of
a port.
Selects
auto to treat the IGMP
queries normally, fixed to
always treat the port as a
querier port no matter there is a
query or edge to treat the port
as a non-querier port which
drops any IGMP queries
received.
pvid <1-4094>
The default PVID is VLAN 1 for
all ports. Sets a PVID in the
range 1 to 4094 for the specified
interface.
ingress-check
Enables the device to discard
incoming frames for VLANs that
are not included in a port
member set.
gvrp
Enables this function to permit
VLAN groups beyond the local
switch.
frame-type
<all|tagged>
Choose to accept both tagged
and untagged incoming frames
or just tagged incoming frames
on a port.