Chapter 5 Easy Mode
NBG6817 User’s Guide
33
The following table describes the labels in this screen.
5.6.2 Guest Wi-Fi
This screen allows you to configure guest wireless network settings on the NBG6817. Users
connected to the guest wireless network can access the Internet via the NBG6817, but not other
networks connected to the NBG6817.
See
for how to enable and set up the
guest wireless network.
Figure 24
Easy Mode: Guest Wi-Fi
Table 10
Easy Mode: Wi-Fi
LABEL
DESCRIPTION
Wireless Radio
Choose whether you want to apply the wireless security to
2.4G Hz
,
5G Hz
or
Both
wireless radios.
Network Name
(SSID)
(Service Set IDentity) The SSID identifies the Service Set with which a wireless station is
associated. Wireless stations associating to the access point (AP) must have the same
SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN.
Security Mode
Select
WPA2-PSK
to enable data encryption. Or Select
No Security
to allow wireless
clients to communicate with the access points without any data encryption.
Password
This field appears when you choose wither
WPA2-PSK
as the security mode.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Verify Password
Type the password again to confirm.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
Apply
Click
Apply
to save your changes back to the NBG6817.
