manualshive.com logo in svg

ZyXEL Communications AMROM Z2, User Manual

Share
Download
ZyXEL Communications AMROM Z2 User Manual Download Page 15

NBG6817 User’s Guide

15

C

H A P T E R

      2

Introducing the Web Configurator

2.1  Overview

This chapter describes how to access the NBG6817 Web Configurator and provides an overview of 
its screens.

The Web Configurator is an HTML-based management interface that allows easy setup and 
management of the NBG6817 via Internet browser. Use a browser that supports HTML5, such as 
Internet Explorer 9.0 and later versions, Mozilla Firefox 21 and later versions, Safari 6.0 and later 
versions or Google Chrome 26.0 and later versions. The recommended screen resolution is 1024 by 
768 pixels.

In order to use the Web Configurator you need to allow:

• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in 

Windows 7.

• JavaScript (enabled by default).
• Java permissions (enabled by default).

Refer to the Troubleshooting chapter (

Chapter 16 on page 161

) to see how to make sure these 

functions are allowed in Internet Explorer.

2.2  Accessing the Web Configurator

1

Make sure your NBG6817 hardware is properly connected and prepare your computer or computer 
network to connect to the NBG6817 (refer to the Quick Start Guide).

2

Launch your web browser.

3

The NBG6817 is in router mode by default. Type "http://192.168.1.1 or http://myrouter" as the 
website address. If the NBG6817 obtains a WAN IP address or a DNS server IP address in the same 
subnet as the LAN IP address 192.168.1.1, the default LAN IP address will be changed to 10.0.0.1 
automatically. See 

Auto-IP Change on page 73

 for more information.

If the NBG6817 is in access point, the IP address is 192.168.1.2. See 

Chapter 4 on page 27

 for 

more information about the modes of the NBG6817.

Your computer must be in the same subnet in order to access this website address.

Summary of Contents for AMROM Z2


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands