
Chapter 13 Applications
NBG6817 User’s Guide
122
13.2.1.2 Add/Edit a Service
Click
Add
new service
in the
Parental Control
>
Add new rules
screen to add a new entry or
click the
Edit
icon next to an existing entry to edit it. Use this screen to configure a service rule.
Figure 81
Expert Mode > Applications > Parental Control > General: Add/Edit new rules: Add new
service
The following table describes the fields in this screen.
Network Service
Network
Service Setting
If you select
Block
, the NBG6817 prohibits the users from using the services listed below.
If you select
Allow
, the NBG6817 blocks all services except ones listed below.
Add new
service
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name
,
Protocol
, and
Port
of the new rule.
#
This shows the index number of the rule. Select the checkbox next to the rule to activate it.
Service Name
This shows the name of the service.
Protocol:Port
This shows the protocol and the port of the service.
Modify
Click the
Edit
icon to go to the screen where you can edit the rule.
Click the
Delete
icon to delete an existing rule.
Block Site/URL Keyword
Keyword
Enter a keyword and click
Add
to add it to the keyword list. This has the NBG6817 block
access to the website URLs that contain the keyword.
Keyword List
Select a keyword and click
Delete
to remove it.
Click
Clear All
to remove all keywords from the keyword list.
Apply
Click
Apply
to save your settings back to the NBG6817.
Back
Click
Back
to return to the previous screen.
Table 41
Expert Mode > Applications > Parental Control > General: Add/Edit new rules (continued)
LABEL
DESCRIPTION
Table 42
Expert Mode > Applications > Parental Control > General: Add/Edit new rules: Add new
service
LABEL
DESCRIPTION
Service Name
Select the name of the service. Otherwise, select
UserDefined
and manually specify the
protocol and the port of the service.
If you have chosen a pre-defined service in the
Service Name
field, this field will not be
configurable.
Protocol
Select the transport layer protocol used for the service. Choices are
TCP
,
UDP
, or
TCP/
UDP
.