manualshive.com logo in svg

ZyXEL Communications AMROM Z2, User Manual

Share
Download
ZyXEL Communications AMROM Z2 User Manual Download Page 12

Chapter 1 Introduction

NBG6817 User’s Guide

12

1

Make sure the power LED is on (not blinking).

2

Press the WPS

 

button for more than three seconds and release it. Press the WPS button on another 

WPS-enabled device within range of the NBG6817. 

Note: You must activate WPS in the NBG6817 and in another wireless device within two 

minutes of each other. 

For more information on using WPS, see 

Section 8.2 on page 49

.

1.7  LEDs

Figure 1   

Front Panel

The following table describes the front panel LEDs.

Table 1   

Front Panel LEDs

LED

COLOR

STATUS

DESCRIPTION

Power/System

White

On

The NBG6817 is receiving power and functioning properly. 

Blinking

The NBG6817 is in the process of starting up, default restoring, 
or My ZyXEL Cloud Server online registration pairing.

Off

The NBG6817 is not receiving power.

Internet

White

On

The NBG6817 has an IP connection but no traffic.

Your device has a WAN IP address (either static or assigned by a 
DHCP server), PPP negotiation was successfully completed (if 
used) and the connection is up.

Blinking

The NBG6817 is sending or receiving IP traffic.

Off

The NBG6817 does not have an IP connection.

2.4G WLAN/WPS 

5G WLAN/WPS

Power

Internet

Summary of Contents for AMROM Z2


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands