background image

Gateway 400

 

User Guide | Glossary 

64

Type of Internet
connection

A flat rate or a time-based tariff rate can be used for the Internet connection. 
When using a time-based tariff, the connection should be manually or auto-
matically disconnected after a specified time of inactivity to avoid unneces-
sary connection charges.

U

UDP

With the 

UDP

 protocol, the data information is sent continuously. No check is 

performed to verify that the received data information is either complete or 
error-free. This procedure ensures fast data transfer, but can also result in 
malformed data packets. This setting is recommended for real-time applica-
tions, such as online games. 

USB

The Universal Serial Bus (USB) is a serial bus system for connecting your Gate-
way 400 with external devices. USB storage devices and printers can be con-
nected to running systems (hot plugging), and their properties can be 
detected automatically.

User Guide

This User Guide provides you with detailed information. The latest edition of 
this User Guide can be found on the Internet at 

www.zyxel.com

 in the Service 

Area. 

V

VoIP

Voice over Internet Protocol. With Internet telephony (VoIP), the information 
required for telephony (i.e., to control the connection setup) and voice can be 
transmitted over a network that is also used for data transmissions (e.g., In-
ternet). The equipment used for this purpose may include computers, special 
IP telephony devices and classical phones connected via adapters.

VoIP Provider

Voice-over-IP provider, also referred to as Internet telephony provider or SIP 
provider. 

W

WANoE

WANoE (Wide Area Network over Ethernet) refers to the use of a separate mo-
dem (e.g., a cable modem) to establish a connection to the Internet. 

WPA

WPA (Wi-Fi Protected Access) is an encryption method for a wireless network 
(WLAN). Ever since WEP has proved to be unsafe, WPA has been established 
as the new standard. The successor is WPA2, which implements the basic fea-
tures of the new IEEE 802.11i security standard.

Summary of Contents for 400





































































Reviews: