ZyXEL Communications 400 User Manual Download

Page: 22 / 68

Gateway 400 User Guide | Configuration

Status of the DSL connection

Status of the ETH connection (only if a WANoE connection is used)

Status of the Internet connection

Status of Voice-over-IP (VoIP) connection(s) to the telephony provider

Status of USB connection(s) (USB devices connected to the USB ports)

Status of LAN connection(s) (network connections) over Ethernet

Language setting - Switch between

glisch or

utsch (German)

Access protection status -

Logout

to exit the configuration dialog.

5.2

Overview

This section gives you an overview of the most important settings for the Gateway 400.



CONNECTION

Status of the DSL or WANoE line.



INTERNET

Status of the Internet connection.



NETWORK

Status of the LAN connections.



USB

Connected USB network devices.



SECURITY

Enabled security settings.



TELEPHONY

Configured telephony settings.



SYSTEM

Hardware and firmware version numbers.



Security Log

Logging of logins, configuration changes, etc.

The icon



indicates that a specific setting has not been configured or is disabled.



indicates that a specific setting has been configured or is enabled.

Click on the corresponding overview item to view additional detailed information.

Click on the “+” symbol

to view detailed information on individual overview items or click on the

“-” symbol

to hide the details already displayed. Use the arrows

next to each overview item to

update the information displayed.

Summary of Contents for 400





































































Search results

Summary of Contents for 400

Reviews:

Related manuals for 400

Brands by name

Popular brands

ZyXEL Communications 400, User Manual

Search results

Summary of Contents for 400

Reviews:

Related manuals for 400

Brands by name

Popular brands