ZyXEL Communications 400, User Manual

Page: 45 / 68

Configuration | Gateway 400 User Guide
45
5.8.10 CWMP
5.8.10.1 ACS Configuration
CWMP (CPE WAN management protocol) is a transport protocol. It is used to transfer configuration
data from an Auto Configuration Server (ACS) to customer premises equipment (CPE) via a broad-
band connection.
The internet address (URL) of the ACS, as well as the associated user name and the password, must
be entered for this purpose. Click
Save .
5.8.10.2 Client Configuration
Enter the Common Network Settings and the CNR Settings for your CNR (Connection Request) port.
Under Dynamic CNR Port , specify the whitelisted and blacklisted CNR ports.
5.8.11 SNMP
The SNMP Network Management Protocol allows you to monitor and control the individual net-
work components from a central management station. The network components are referred to as
the
Agents , and the management station is referred to as the Manager . To communicate with each
other, the Agents and the Manager must be located in the same Community . The SNMP protocol al-
lows you to remotely configure network components, send error messages to the management sta-
tion, etc.
SNMP is disabled by default. To activate it, you must enable the option Enable SNMP Agent . Under
Community , specify the community in which your Agent and its associated Manager are located.
Click Save
.