22/52 | Operation manual Z130-SE | 05/2016
23/52 | Operation manual Z130-SE | 05/2016
Type of
cereal
Cylinder speed
Concave
spacing
1 - 9 settings
De-awner bars
Wind strength
Sieve
Hole Ø in mm
Field beans
450 - 600
7 - 9
-
900 - 1300
PS20
Peas
400 - 500
7 - 9
-
900 - 1200
PS20
Barley
1000 - 1300
1 - 2
2 - 4
800 - 1000
PS14
Grass
1300 - 1500
1 - 3
1 - 2
600 - 800
PS8
Oats
1000 - 1200
2 - 3
-
800 - 1000
14
Linseed
700 - 900
1 - 3
-
700 - 900
8
Lupines
400 - 600
4 - 6
-
600 - 900
20
Cor
n
500 - 700
8 - 9
-
800 - 900
20
Rapeseed
700 - 1000
9
-
750 - 900
8
Rice
800 - 1000
Pin threshing system
800 - 1000
14
Rye
1000 - 1200
2 - 3
-
800 - 1000
14
Beet seed
800 - 1000
2 - 5
-
600 - 900
8
Mustard
700 - 1000
2 - 6
-
750 - 900
8
Soybeans
400 - 600
7 - 9
-
900 - 1200
20
Sunflowers
700 - 1000
6 -8
-
700 - 900
20
Triticale
1000 - 1300
2 - 3
- (1)
800 - 1000
14
Wheat
1000 - 1300
2 - 3
- (1)
800 - 1000
14
7. Thresher settings
Table thresher settings
7.1. Checking the threshing result
After starting threshing, visually inspect the threshing result and check the settings if neces-
sary.
7.2. Changing round hole sieves
1. Undo the two knurled bolts for the dust
plate (see 7.7).
2. Remove the dust plate.
3. Undo the clamping nuts (Fig. 7.1) on both
round hole sieves.
4. Remove the sieves.
5. Fit the new sieves.
6. Evenly tighten the clamping nuts for the
sieves.
7. Fit the dust plate.
8. Evenly tighten the knurled bolts for the
dust plate.
7.3. Setting threshing cylinder speed
To set the speed the combine’s engine must be started!
The speed of the threshing cylinder is set using the rocker switch on the dashboard
The speed set can be read on the speed display (see 3.2).
The engine must be shutdown and the ignition key removed during all adjust-
ments.
Fig. 7.1
