Zubler VARIO PRESS 300, Operation Instructions Manual

Page: 34 / 49

34
Program examples
Professional Mode
Page
5.
5.2 Firing Programs*
Authentic
®
450 yes 3:00 3:00 450 0:30 55 845 1:00 -- -- 845 0:00 yes Heat-up 845
450 yes 3:00 3:00 450 0:30 55 950 1:00 -- -- 950 0:00 yes Heat-up 950
450 yes 3:00 3:00 450 0:30 45 780 1:00 -- -- 780 0:00 yes Heat-up 780
450 yes 3:00 2:00 450 0:30 45 770 1:00 -- -- 770 0:00 yes Heat-up 770
450 yes 3:00 2:00 450 0:30 45 760 1:00 -- -- 760 1:00 yes Heat-up 760
450 yes 3:00 2:00 450 0:30 45 750 1:00 -- -- 750 1:00 yes Heat-up 750
450 no - 3:00 450 0:30 45 740 1:00 -- -- 740 1:00 yes Heat-up 740
450 no - 3:00 450 0:30 45 745 1:00 -- -- 745 1:00 no -- --
450 yes 3:00 3:00 450 0:30 45 715 1:00 -- -- 715 1:00 yes Heat-up 715
450 yes 3:00 3:00 450 0:30 45 710 1:00 -- -- 710 1:00 yes Heat-up 710
Opa. paste 845°C
Opa. paste 950°C
Margin 1
Margin 2
Dentin 1
Dentin 2
Stain
Glaze without Vac.
Glaze with Vac.
Correction
*All firing programs are only recommendations of the ceramic producer and can be modified individually
** Refer to the alloy manufacturer’s instructions
Start Pre Pre Closing Soak Soak Heat Final Hold Temper Temper Opening Opening Vacuum Release Vacuum
tempe- dry drying time tempera- time rate tempera- time tempera- time tempera- time vacuum end
rature [°C] time [min] [min] ture [°C] [min] [°C/min] ture [°C] [min] ture [°C] [min] ture [°C] [min] [°C]
Zubler Gerätebau GmbH
■
D-89 081 Ulm
■
Tel. +49(0)731-14 52-0
en