Zubler VARIO PRESS 300, Operation Instructions Manual

Page: 3 / 49

3
Page
Contents
0. Introduction
Page
4
0.1 Statement of compliance
0.2 General
0.3 Setting up the furnace
Page
6
0.4 Basic Settings
0.5 Use within specifications
0.6 Hints for your safety
1. Main menu
Page
12
1.1 Run programs
1.2 Edit programs
1.2.1 New/change program
1.2.2 Copy/change program
1.2.3 Move program
1.2.4 Erase program
1.2.5 Look at program
1.2.6 New/change brand
1.2.7 Erase brand
1.2.8 USB transfer
1.3 Setup oven
Page
27
1.3.1 Change idle temperature
1.3.2 Change night temperature
1.3.3 Customize calibration
1.3.4 Vacuum pump operation
1.3.5 Set vacuum level
1.3.6 Diagnostic tests
❶ Run pre-heat/dry program
➋
Run purge program
➌
About version
➍
Update software
➎
Service tests
1.3.7 Customize country
Signs and Symbols
Risks and dangers
This symbol marks safety
instructions that must be followed
to prevent injury or death
Caution Hot Surface
Burn hazard
Risks of crushing/pinching
Conflict
Risk of electric shock
Attention:
It is critical that the user completely read
the operating manual prior to start up!
It contains important information on
safety, operation and maintenance that is
designed to protect you and prevent
damage to the instrument.
Please pay particular attention to the
safety information on pages 6 - 11.
1.3.8 Adjust display
1.3.9 Audio beeps
1.4 Run warm-up program
Page
28
1.5. Start night mode
Page
28
1.5.1 Stand-by temperature
2. Maintenance
Page
29
2.1 Water separator
2.2 Filter element for
compressed air supply
2.3 Filter element for
vacuum pump
2.4 Spare parts
3. Technical data
Page
30
3.1 Scope of supply
4. Service
Page
32
5. Program examples
Page
33
5.1 Press programs
5.2 Firing programs
6. Important notes for the
Page
43
processing of Lithium Disilicate
VARIO PRESS 300.e
(e.max press*)
6.1 Investment
6.2 Mixing of investment
6.3 Preparation of the ring
6.4 Investing
6.5 Burnout furnace
6.6 Pressing
6.7 Devesting
6.8 Further Information
* e.max Press is a registered trade mark of Ivoclar Vivadent