Zubler VARIO PRESS 300, Operation Instructions Manual

Page: 17 / 49

17
Page
Enter Esc
2 - PULSE MC CERAMAY
400C EDIT 43-PULSE MC DENTIN 1
Program type Professional
-Start temp 450C
-Pre dry Yes
-Pre dry time 3:00
-Closing time 3:00
-Soak temp 450C
-Soak time 0:30
-Heat rate 55C
-Final temp 820C
-Hold time 1:00
-Temper No
-Open temp 820C
-Opening time 1:00
-Vacuum Yes
-Release vacuum Heat up
-Vacuum End 820C
-Edit done ? No
We recommend the Professional program for all firing
tasks. Perfect pre-drying and uniform heating ensure
excellent firing results.
VITA In-Ceram ® is a registered Trademark of Vita Zahnfabrik H.Rauter GmbH & Co.KG
Main menu 1.
Changing the firing parameters
You can select the program type in the
first line:
❶
Professional
program: individual firing
management with 16 programmable
parameters for processing all dental
ceramic materials perfectly.
➋
Standard program: a standard firing
management in accordance with the
guidelines for the dental ceramics
available on the market.
➌ Special program: this firing program
is recommended for processing
ceramic materials, which require two
holding times under vacuum and/or
two different heat rates.
(specially for crystallization programs).
➍ I
- Press
program: Intelligent mode for
processing all pressable ceramics for
producing all ceramic restorations and
press-to-metal
®
technique.
The press time is automatically deter-
mined via the intelligent I-Press
sensor system.
❺
Press program: The traditional timed
Press mode for processing pressable
ceramics.
➏
Sinter program: Used for sintering
alumina framework ceramics (such as
Vita
® InCeram*). This program will be
made available by the manufacturer
only on special request.
We recommend the I-Press program for all pressing
tasks. The I-Press function optimizes pressing results.