Chapter 9
Network
Management
Confidential and Proprietary Information of ZTE CORPORATION
279
T
A B L E
4 3 4
A
S S E M B L I N G
P
O R T
I
N F O R M A T I O N
Parameters
Description
Group Num
Assembling group number that assembling
port belongs to
Group Mode
Assembling mode that assembling port
belongs to
Lacp Time
Overtime of assembling port
LacpActiv
Active/passive mode of assembling port
2. To configure basic attributes “AdminStatus” and
“LacpPriority” of LACP, and attributes “LacpTime” and
“LacpActive” of assembling port in the page.
3. After configuration click
Apply
button to submit.
Result:
This configures basic attribute of LACP.
4. To configure batch assembling port attributes, select the
check boxes of assembling ports
Select All
, all ports are
selected, then click
Set
button to open batch assembling
ports configuration page, as shown in Figure 62.
F
I G U R E
6 2
B
A T C H
A
S S E M B L I N G
P
O R T S
C
O N F I G U R A T I O N
5. To configure assembling port attributes in the page, click
Apply
button to submit.
Result:
This configures assembling port attributes.
6. Click the catalog tree in the left of system main page
Configuration
>
Lacp > Lacp State
to open assembling
group information page, as shown in Figure 63.
