Chapter 9
Network
Management
Confidential and Proprietary Information of ZTE CORPORATION
251
3. To add a member based on temporary device ID obtained
from collected topology information, use command
set
group add device
<idlist> in group config mode. This is
shown in Table 412.
T
A B L E
4 1 2
S
E T
G
R O U P
A
D D
D
E V I C E
C
O M M A N D
Format
Mode
Function
set group add
device
<idlist>
group config
This adds a
member based on
temporary device
ID obtained from
collected topology
information
Result:
This adds a member based on temporary device ID
obtained from collected topology information.
4. To delete a device with specified member ID from cluster,
use command
set group delete member
<idlist> in group
config mode. This is shown in Table 413.
T
A B L E
4 1 3
S
E T
G
R O U P
D
E L E T E
M
E M B E R
C
O M M A N D
Format
Mode
Function
set group delete
member
<idlist>
group config
This deleted a
device with
specified member
ID from cluster
Result:
This deletes a device with specified member ID from
cluster.
E
ND OF STEPS
Cluster member has been add/delet.
When a device is added to cluster but member ID is not
specified, system automatically allocates a unique ID to the
member.
Configuring Cluster Parameters
This topic describes the configuration of cluster parameters.
For the configuration of cluster parameters, perform the
following steps.
1. To set cluster name, use command
set group name
<name> in group config mode. This is shown in Table 414.
T
A B L E
4 1 4
S
E T
G
R O U P
N
A M E
C
O M M A N D
Format
Mode
Function
set group name
group config
This sets cluster
Result
Note:
Purpose
Steps
