ZXR10 2920/2928/2952
(V1.0)
Access Switch User Manual
（
Volume I
）
154
Confidential and Proprietary Information of ZTE CORPORATION
To enable the communication between switch and host on the
network segment 192. 1. 2. 0/24, configure the following
static route.
zte(cfg)#config router
zte(cfg-router)#iproute 192. 1. 2. 0/24 192. 1.
1. 2
Use command
show iproute
to view the direct routes and static
routes on the switch.
Command result displays destination network segment, next-
hop address, route metric and egress interface of the static
route. The following shows the result.
zte(cfg-router)#show iproute
Type IpAddress Mask Gateway
Metric IPport
------ --------------- --------------- --------------- -
----- ------
direct 192. 1. 1. 0 255. 255. 252. 0
192. 1. 1. 1 0 0
static 192. 1. 2. 0 255. 255. 255. 0
192. 1. 1. 2 0 0
Total: 2
Use command
clear iproute
to delete one or more static routes.
Configuring ARP Table Entry
This topic describes the configuration of ARP table entry.
For the configuration of ARP table entry, perform the following
steps.
1. To add a static ARP table entry, use command
arp add
<A. B. C. D> <xx. xx. xx. xx. xx. xx> <0-63>
<vlanname> in router config mode. This is shown in Table
247.
T
A B L E
2 4 7
A
R P
A
D D
C
O M M A N D
Format
Mode
Function
arp add <A. B.
C. D>
<xx. xx.
xx. xx. xx. xx>
<0-63>
<vlanname>
router config
This adds a static
ARP table entry
Result:
This adds a static ARP table entry.
Purpose
Steps
