Zte ZXR10 2920, User Manual

Page: 103 / 341

Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 89
T
A B L E
9 3 S
E T
L
A C P
P
O R T
T
I M E O U T
C
O M M A N D
Format Mode Function
set lacp port
<portlist>
timeout
{long|short}
Global
config
This configures the timeout
information of the port participating
in the aggregation
Result: This configures the timeout information of the port
participating in the aggregation.
5. To set the priority of LACP, use command set lacp
priority <1-65535> in global configuration mode. This is
shown in Table 94.
T
A B L E
9 4 S
E T
L
A C P
P
R I O R I T Y
C
O M M A N D
Format Mode Function
set lacp
priority <1-
65535>
Global
config
This sets the priority of LACP
Result: This sets the priority of LACP.
6. To display the LACP configuration information, use
command show lacp in global configuration mode. This is
shown in Table 95.
T
A B L E
9 5 S
H O W
L A C P C
O M M A N D
Format Mode Function
show lacp
Global
config This displays the LACP
configuration information
Result: This displays the LACP configuration information.
7. To display the aggregation information about the LACP
aggregation group, use command show lacp aggregator
[<trunkid>] in global configuration mode. This is shown in
Table 96.
T
A B L E
9 6 S
H O W
L
A C P
A
G G R E G A T O R
C
O M M A N D
Format Mode Function
show lacp
aggregator
[<trunkid>]
Global
config
This displays the aggregation
information about the LACP
aggregation group
Result: This displays the aggregation information about the
LACP aggregation group.
8. To display the information of the port where the LACP is
involved in the aggregation, use command show lacp port
[<portlist >] in global configuration mode. This is shown in
TABLE 99 .