Zte ZXR10 2900 Series, User Manual

Page: 183 / 262

Chapter 7 Service Configuration
dress 192.168.1.1. Bind vlan100 with 192.168.1.2. Port 1 on
switch connects with PC.
F
IGURE
71 L
AYER
-3 C
ONFIGURATION
E
XAMPLE
Configuration of switch:
zte(cfg)#set vlan 100 en
zte(cfg)#set vlan 100 add port 1 untag
zte(cfg)#set port 1 pvid 100
zte(cfg)#config route
zte(cfg-router)#set ipport 0 ipaddress 192.168.1.2 255.255.255.0
zte(cfg-router)#set ipport 0 vlan 100
zte(cfg-router)#set ipport 0 enable
zte(cfg-router)#show ipport
IpPort
En/Disable IpAddress Mask MacAddress VlanId
------ -------- ------------- ------ -------- --------
0 enabled 192.168.1.2 255.255.255.0 00.d0.d0.fa.29.20 100
zte(cfg-router)#ex
zte(cfg)#ping 192.168.1.1
/*use the command ping to see whether the layer-3 port is available.*/
zte(cfg)#ping 192.168.1.1
Reply from 192.168.1.1 : bytes=28 time<1ms TTL=64
Reply from 192.168.1.1 : bytes=28 time<1ms TTL=64
Reply from 192.168.1.1 : bytes=28 time<1ms TTL=64
Reply from 192.168.1.1 : bytes=28 time<1ms TTL=64
Reply from 192.168.1.1 : bytes=28 time<1ms TTL=64
Access Service
Configuration
Access Service Overview
With the rapid expansion of Ethernet construction scale, to meet
the fast increase of subscribers and requirement of diversified
broadband services, Network Access Service (NAS) is embedded
on the switch to improve the authentication and management
of access subscribers and better support the billing, security,
operation, and management of the broadband network.
NAS uses the 802.1x protocol and RADIUS protocol to realize the
authentication and management of access subscribers. It is highly
efficient, safe, and easy to operate.
Confidential and Proprietary Information of ZTE CORPORATION 171