Chapter 7 Service Configuration
ZESR Smart Link Networking Example
F
IGURE
61
SMART LINK NETWORKING
This example describes how to configure ZESR smart link network-
ing domain. The smart link networking composed of 5 switches is
shown above. There are one ZESR primary ring and one smart
link node.
1. The primary ring is composed of nodes S1~S4. S1 is Master,
P1 is the PrimaryPort, P2 is the SecondaryPort, S2 is the Transit
node, S3~S4 are Edge-Transit node, P3 is the Access port using
for Smart Link.
2. S5 is the Smart Link node. P1 is the PrimaryPort. P2 is the
SecondaryPort.
The protect instance in the ring is 1, the protected data is VLAN
100 and the protocol VLAN is VLAN 4000.
node configuration of switch:
1. S1 node
VLAN:
zxr10(cfg)#set vlan 100 add port 1
，
2
zxr10(cfg)#set vlan 4000 add port 1
，
2 tag
zxr10(cfg)#set vlan 100
，
4000 enable
zxr10(cfg)#set port 1
，
2 pvid 100
STP:
zxr10(cfg)#set stp instance 1 add vlan 100
Confidential and Proprietary Information of ZTE CORPORATION
117
