Zte ZXR10 2900 Series, User Manual

Page: 110 / 262

ZXR10 2900 Series User Manual
Command Function
zte(cfg)#
set stp instance < 0-15 > port
< portname > loop-guard { enable | disable }
This enables/disables
instance port loop
protection.
zte(cfg)#
set stp instance < 0-15 > trunk
< trunkname > cost < 1-200000000 >
This sets instance trunk
cost.
zte(cfg)#
set stp instance < 0-15 >
trunk < trunkname > root-guard
{ enable | disable }
This enables/disables
instance trunk root
protection.
zte(cfg)#
set stp instance < 0-15 > trunk
< trunkname > loop-guard { enable | disab
le }
This enables/disables
instance trunk loop
protection.
zte(cfg)#
set stp port < portlist >{ enable
| disable }
This enables/disables
port stp function.
zte(cfg)#
set stp trunk < trunklist >{ enab
le | disable }
This enables/disables
trunk stp function.
zte(cfg)#
set stp port < portlist >
bpdu-guard { enable | disable }
This enables/disables
port bpdu protection.
zte(cfg)#
set stp port < portlist > pcheck This sets port stp type
check.
zte(cfg)#
set stp bpdu-interval
< 10-65535 >
This sets BPDU
protection port
linkdown interval, the
default is 100, the unit
is s.
zte(cfg)#
set stp port < portlist > linktype
{ point-point | shared }
This sets instance port
Linktype.
zte(cfg)#
set stp trunk < trunklist >
linktype { point-point | shared }
This sets instance trunk
Linktype.
zte(cfg)#
set stp port < portlist >
packettype { IEEE | CISCO | HUAWEI |
HAMMER | extend }
This sets instance port
packet type.
zte(cfg)#
set stp trunk < trunkid >
packettype { IEEE | CISCO | HUAWEI |
HAMMER | extend }
This sets instance trunk
packet type.
zte(cfg)#
set stp hellotime < 1-10 > This sets STP
notification interval,
the default is 2, unit is
s.
zte(cfg)#
set stp forwarddelay < 4-30 >
This sets STP
forwarding delay time,
the default is 15, unit is
s.
zte(cfg)#
set stp agemax < 6-40 >
This sets STP aging
time, the default is 20,
unit is s.
98 Confidential and Proprietary Information of ZTE CORPORATION