ZXR10 2900 Series User Manual
Command
Function
zte(cfg)#
set bandwidth geport
<
portlist
>
egress
{
on rate
<
281-100M/
1G
>[
burstsize
<
4-16380
>]}|
off
}
This configures the
egress rate limit on
gigabit port.
The parameter
burstsize
<
4-16380
>: the unit is kbyte.
23. To configure packet type of port ingress rate limit on gigabit
port, use the following command.
Command
Function
zte(cfg)#
set bandwidth geport
<
portlist
>
packet-type
{
unicast
|
nounicast
|
multicast
|
broadcast
}{
enable
|
disable
}
This configures packet
type of port ingress
rate limit on gigabit
port.
24. To remark the VLAN attribution of the designated flow, use the
following command.
Command
Function
zte(cfg)#
set policy vlan-remark in acl
<
1-400
>
rule
<
1-500
><
1-4094
>{
nes
ted
|
replaced
{
untagged
|
tagged
|
all
}}
This remarks the
VLAN attribution of
the designated flow.
rule
<
1-500
>, if global ACL, only 16 rules is supported.
25. To limit and measure the data flow rate according to the flow,
use the following command.
Command
Function
zte(cfg)#
set policy policing in acl
<
1-400
>
rule
<
1-500
>
policer
<
0-255
>
This limits and
measures the data
flow rate according to
the flow.
26. To copy the specified data flow to the monitor port, use the
following command.
Command
Function
zte(cfg)#
set policy mirror in acl
<
1-4
00
>
rule
<
1-500
>{
cpu
|
analyze-port
}
This copies the
specified data flow
to the monitor port.
27. To redirect the specified data flow to the user-specified egress
port, use the following command.
Command
Function
zte(cfg)#
set policy redirect in acl
<
1-400
>
rule
<
1-500
>{
cpu
|
port
<
portid
>}
This redirects the
specified data flow
to the user-specified
egress port.
162
Confidential and Proprietary Information of ZTE CORPORATION
