ZXR10 2900 Series User Manual
4. Port configuration about MAC
5. Configuration about multicast
6. Port information view
Port Basic Configuration
On ZXR10 2920/2928/2952/2936-FI, the port parameters such as
auto negotiation, duplex mode and rate, flow control and MAC ad-
dress number restriction and so on, can be configured
To configure the basic port parameters, perform the following
steps.
Command
Function
zte(cfg)#
clear port
<
portlist
>{
name
|
statistics
|
description
}
This clears port name
or statistics data.
zte(cfg)#
create port
<
portid
>
name
<
name
>
This creates port
description name.
name
<
name
>: The
port name can not
be more than 200
characters. 1~255 is
reserved, which can not
be configured.
zte(cfg)#
set port
<
portlist
>{
enable
|
disable
}
This enables or disables
the port. The port is
disabled by default.
zte(cfg)#
set port
<
portlist
>
speedadvert
ise maxspeed
zte(cfg)#
set port
<
portlist
>
speedadver
tise maxspeed
{
speed10
|
speed100
|
speed1000
}{
fullduplex
|
halfduplex
}
This sets the port
speedadvertise.
Port speedadvertise is
to set the negotiation
speed between the
local port and the
other end port. If the
gigabit port is set as
speed100/fullduplex,
the negotiation begins
from the 100Mbps,
fullduplex.
When
setting Maxspeed, the
speed is 100Mbps,
fullduplex for megabit
port; the speed is
1000M, fullduplex for
gigabit port.
zte(cfg)#
set port
<
portlist
>
duplex
{
full
|
half
|
auto
}
This sets the working
mode of port as
fullduplex or halfduplex.
zte(cfg)#
set port
<
portlist
>
speed
{
10
|
100
|
1000
|
auto
}
This sets the
speed of port as
10M/100Mbps/1000M.
66
Confidential and Proprietary Information of ZTE CORPORATION
