9
GETTING STARTED
8
GETTING STARTED
Installing the microSDHC
™
Card (not included)
The microSDHC card can be installed and removed while the phone is turned
on . Unmount the microSDHC card before removing or replacing it .
1 . Remove the back cover .
2 . Hold your microSDHC card with the metal
contacts facing down and slide it into the card slot .
3 . Press the back cover gently back into place until you
hear a click .
Note:
Some applications may require a microSDHC card
to work normally or may store certain data on it . Therefore,
it is recommended that you keep a microSDHC card installed
and not remove or replace it randomly .
Charging the battery
Although the battery comes partially charged, it is recommended you fully
charge the battery before using your phone for the first time .
If the battery is low, there will be a pop-up message
on the screen . As you charge your phone, the screen
will tell you the exact battery level each time you wake
up your phone .
Warning!
Use only ZTE-approved chargers and cables .
The use of unapproved accessories could damage
your phone or cause the battery to explode .
1 . Insert the charger’s connector into the charging port . Be sure to insert
the connector in the correct orientation . Do not force the connector into
the port .
2 . Plug the charger into a standard AC wall outlet .
3 . When the battery is fully charged, unplug the charger and disconnect it
from the phone .
Extending the battery life
Active applications, screen brightness levels,
Bluetooth
and Wi-Fi usage and
GPS functionality can drain your battery . You can follow the helpful tips below
to conserve your battery power:
• Reduce the screen backlight time .
• Lower the screen brightness .
• Turn auto-sync, Wi-Fi, and
Bluetooth
off when not in use .
• Disable the GPS function when not in use . Most applications using this
function will periodically query the GPS satellites for your current location;
each query drains your battery .
Switching your phone on/off
Make sure the SIM card is in your phone and the battery is charged .
• Press and hold the
Power key
to turn on your phone .
• To turn it off, press and hold the
Power key
to open the options menu .
Tap
Power off
>
OK
.
Setting up your phone for the first time
When you first power on your phone after you purchase it or reset it to factory
settings (see
Phone settings – Backup & reset
), you need to set up your
phone settings before using it .
1 . Scroll the language list to highlight the language you need and then
tap
Start
.
2 . Select a Wi-Fi
®
account to connect your phone to or tap
Skip
.
Summary of Contents for Cricket Grand X
Page 1: ...User Guide ...
Page 59: ...114 Notes NOTES ...
