Zte AD3812 Command Manual Download Page 69

Page: 69 / 71

WCDMA Module

7.3 +CPBF Find Phonebook Entries

Description

Execution command returns phonebook entries (from the current phonebook
memory storage selected with +CPBS)

which alphanumeric field start with string <findtext>. Entry fields returned are
location number <index

>, phone

number stored there <number> (of format <type>), text <text> associated with
the number, if the selected

phonebook supports hidden entries, <hidden> indicating if the entry is hidden,
<group> indicating a group the entry

may belong to, <adnumber> an additional number (of format <adtype>),
<secondtext> a second text field

associated with the number and <email> an email field. If listing fails in an MT
error, +CME ERROR: <err> is

returned. Refer subclause 9.2 for <err> values.

Test command returns the maximum lengths of <number>, <text>, <group>,
<secondtext> and <email>

fields. In case of (U)SIM storage, the lengths may not be available. If MT is not
currently reachable, +CME ERROR:

<err> is returned. Refer subclause 9.2 for <err> values.

+CPBF=<findtext> [+CPBF:

[,<hidden>][,<group>][,<adnumber>][,<adtype>][,<
se

condtext>][,<email>][[...]

[,<hidden>][,<group>][,<adnumber>][,<adtype>][,<
se

condtext>][,<email>]]]

+CME ERROR: <err>

Command

+CPBF =?

+CPBF:

[<nlength>],[<tlength>],[<glength>],[<slength>],[<e
length>]

+CME ERROR: <err>

Defined values

<index1>, <index2>: integer type values in the range of location numbers of
phonebook memory

<number>: string type phone number of format <type>

<type>: type of address octet in integer format (refer TS 24.008 [8] subclause
10.5.4.7)

<group>: string type field of maximum length <glength>; character set as
specified by command Select TE

Character Set +CSCS

<adnumber>: string type phone number of format <adtype>

<adtype>: type of address octet in integer format (refer TS 24.008 [8] subclause
10.5.4.7)

<secondtext>: string type field of maximum length <slength>; character set as
specified by command Select

TE Character Set +CSCS

Summary of Contents for AD3812








































































Search results

Summary of Contents for AD3812

Reviews:

Brands by name

Popular brands

Zte AD3812, Command Manual

Search results

Summary of Contents for AD3812

Reviews:

Brands by name

Popular brands