manualshive.com logo in svg

Zte AD3812, Command Manual

Share
Download
Zte AD3812 Command Manual Download Page 40

 

                                                                                                                                                    WCDMA Module 

 

39

receiving a mobile terminated call. Set command enables or disables the 
presentation of the called line identifications at 

the TE. 

When the presentation of the called line identification at the TE is enabled, 

+CDIP:<number>,<type>[,<subaddr>,<satype>] response is returned after 
every RING (or +CRING: 

<type>; refer subclause "Cellular result codes +CRC") result code sent from TA 
to TE. It is manufacturer specific if 

this response is used when normal voice call is answered. 

Read command gives the status of <n>, and also triggers an interrogation of the 
provision status of the "multiple called 

numbers" service. Test command returns values supported as a compound 
value. 

 

+CDIP=[<n>] 

 

 

+CDIP? 

 

+CDIP: <n>,<m> 

 

Command

 

+CDIP=? 

 

+CDIP: (list of supported <n>s) 

 

Defined values

 

 

<n> (parameter sets/shows the result code presentation status to the TE): 

0 disable 

1 enable 

<m> (parameter shows the subscriber "multiple called numbers" service status 
in the network): 

0 "multiple called numbers service" is not provisioned 

1 "multiple called numbers service" is provisioned 

2 unknown (e.g. no network, etc.) 

<number>: string type phone number of format specified by <type> 

<type>: type of address octet in integer format (refer TS 24.008 [8] subclause 
10.5.4.7) 

<subaddr>: string type subaddress of format specified by <satype> 

<satype>: type of subaddress octet in integer format (refer TS 24.008 [8] 
subclause 10.5.4.8) 

 

4.10  +CPOL Preferred PLMN list 

 

Description

 

This command is used to edit the PLMN selector with Access Technology lists in 
the SIM card or active application in 

the UICC(GSM or USIM). 

Execute command writes an entry in the SIM/USIM list of preferred PLMNs, 
previously selected by the command 

+CPLS. If no list has been previously selected, the User controlled PLMN 
selector with Access Technology, 

EFPLMNwAcT, is the one accessed by default. If <index> is given but <oper> is 
left out, entry is deleted. If <oper> is 

Summary of Contents for AD3812








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands