Zte AD3812 Command Manual Download Page 61

Page: 61 / 71

WCDMA Module

+CSCA=?

Defined values

6.12 +CSCB: Select Cell Broadcast Message Types

Description

Set command selects which types of CBMs are to be received by the ME.

Test command returns supported modes as a compound value.

+CSCB=[<mode>[,<mids>[,<dcss>]]
]

+CSCB?

+CSCB: <mode>,<mids>,<dcss>

Command

+CSCB=?

+CSCB: (list of supported <mode>s)

Defined values

<mode>:

0 message types specified in <mids> and <dcss> are accepted

1 message types specified in <mids> and <dcss> are not accepted

<mids>: string type; all different possible combinations of CBM message
identifiers (refer <mid>) (default is

empty string); e.g. "0,1,5,320-478,922"

<dcss>: string type; all different possible combinations of CBM data coding
schemes (refer <dcs>) (default is

empty string); e.g. "0-3,5"

6.13 +CSMP Set Text Mode Parameters

Description

Set command is used to select values for additional parameters needed when
SM is sent to the network or placed in a

storage when text format message mode is selected. It is possible to set the
validity period starting from when the SM is

received by the SMSC (<vp> is in range 0... 255) or define the absolute time of
the validity period termination (<vp>

is a string). The format of <vp> is given by <fo>. If TA supports the enhanced
validity period format ($(EVPF)$, see

GSM 03.40), it shall be given as a hexadecimal coded string (refer e.g. <pdu>)
with double quotes.

+CSMP=[<fo>[,<vp>[,<pid>[,<dcs>]]
]]

Command

+CSMP?

+CSMP: <fo>,<vp>,<pid>,<dcs>

Summary of Contents for AD3812








































































Search results

Summary of Contents for AD3812

Reviews:

Brands by name

Popular brands

Zte AD3812, Command Manual

Search results

Summary of Contents for AD3812

Reviews:

Brands by name

Popular brands