52
A setting program is available for the actuators (it is described in these Assembly Instructions); it enables
the parameters of the electronic outfit of the actuators to be set and checked by a computer.
The electronics is connected to the serial port of the computer by a cable (it is available e.g. under the name
“Extending cable for mouse 9F-9M”).
In case the computer is not fitted with a serial port the converter USB-RS 232, can be ordered.
Actuators fitted with electronics DMS2 ED
Part name
Part
Stock
Note
designation
item
Source board
DMS2.ED.Z
39620000
Position sensor multi-revolution
DMS2.ED.S
39620001
Torque sensor
DMS2.TORK
39620003
common for DMS2.ED and DMS2
Analog module
DMS.ED.CPT
39620004
back signal 4 – 20 mA and software
blocked regulator
Display
DMS2.ED.D
39620005
Actuators fitted with electronics DMS2
Source board analog
DMS2.ZAN
39620014
only for analog
Source board Profibus
DMS2.ZPR
39620015
only for Profibus version
Position sensor multi-revolution
DMS2.S
39620016
Torque sensor
DMS2.TORK
39620003
common for DMS2.ED and DMS2
Display
DMS2.DP
39620018
Board of local control block
DMS2.H1
39620019
Dynamic brakes (for actuators with electronics DMS2 ED a DMS2)
Brake
BR2 550
2339610124
Brake
BR2 BK 550 2339610128
Brake
BR 2,2
2339610142
Brake
BR BK 2,2
2339610141
Braking resistance
TR342 68R
2337110355
