Zoom NUD360-F Software User'S Manual Download Page 103

Page: 103 / 108

Software User’s Manual Ver.A1D-502-V8.03.30-NB

103

5-8-3 Factory Default

The section Factory Default allows the camera settings be reset to

the original factory settings.

If you want to keep network settings and restore other settings to factory default, please

select the first option. If you select the second one instead, all the settings would be

removed during factory default. You will have to use factory default IP setting to connect

to this camera.

5-8-4 Firmware Upload

The section Firmware Upload allows remote upgrade or downgrade

of camera firmware. The upgrade to newer version is usually done in order to gain new

functions or fix existing bugs or limitations while downgrade to older version is used mostly

for integration purposes where the newly purchased camera model comes with the newer

firmware version than supported by a third party video management system of a given

project.

Firmware uploading can be done in two ways, choose to download and select the firmware

image manually or use auto-upgrade function through

“

Firmware Upload from the

Download Center

”

so that the camera will connect to internet and find the latest firmware

image automatically.

5-8-4-1 Firmware Upload from Local

To upload the firmware manually, download the firmware image file, which contains the

file extension

“

.upg

”

, from the website. Choose

“

Firmware Upload from Local

”

and press

the Apply button.

Summary of Contents for NUD360-F













































































































Search results

Summary of Contents for NUD360-F

Reviews:

Zoom NUD360-F, Software User'S Manual, Page: 103 / 108

Search results

Summary of Contents for NUD360-F

Reviews: