11
、
REAR COVER COMPONENT
102
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-102000 Non-standard bolt M6×16
（
304 stainless steel
）
6
2
1274100-057095
Flanging bushing φ6.2×φ8.5×3.5
＋
φ14×1.5
6
3
1244100-052000 Buffer rubber of flanging bushing
（
φ8.5×φ14×1
）
6
4
1174200-029000 ZT310-V Stop light
1
5
1174200-027000 ZT310-V rear left light
1
6
4044201-252051 ZT310-V rear cover dark grey
1
7
1174200-028000 ZT310-V rear right light
1
8
1251300-063093 Plywood M6×11×15
（
color zinc
）
10
PROCEDURE:
●
Rear light
First pull out the plug of the left rear tail lamp
⑸
and the right rear tail lamp
⑺
.
Remove two bolts
⑴
of the brake lamp
⑷
, take off the bushing
⑵
and cushion rubber
⑶
;Pull up the outlet
side of brake lamp and remove it.
Remove the bolt
⑴
on both sides of the left rear lamp
⑸
, remove bushing (2) and cushion rubber
⑶
;Pull back
the left rear tail light.
Remove the right rear tail lamp
⑺
as shown above.
Remove from the rear trim cover
⑹
8 pieces nuts
⑻
Respectively from the left tail lamp
⑸
and right tail lamp once each took a piece of nut.
CAUTION:
●
The material should be protected during discomponent to prevent scratching the lamp.
●
Never pull the cable directly.
Fig.6 REAR COVER
COMPONENT
Tail skirt taillight component 4
