Cable/DSL Broadband Router w/4-Port Switch
27
4.4 Routing
If the Router is connected to more than one network, it may be necessary
to set up a static route between them. A static route is a pre-determined
pathway that network information must travel to reach a specific host or
network.
Figure 4-11
Type / Target / Mask / Gateway:
Fill in these fields required by this
Static Routing function.
Add:
Click this button to add a new static routing. When you click this
button, the next figure appears.
Current Routing Table:
This display shows the valid routing paths in
Broadband Router. User can view the information about current routing
paths
Fill in the all of the setting to be added and then click "Add". Then this
Special Application setting will be added into the "Current Routing Table"
below.
If you want to remove some Special Application settings from the " Current
Routing Table ", select the Special Application settings you want to remove
in the table and then click "Delete ".
When finished making your changes on this screen, click the Save button
to save these changes.
4.5 NAT
Network Address Translation (NAT) allows multiple users at your local site
to access the Internet through a single Public IP Address. NAT provides
Firewall protection from hacker attacks and has the flexibility to allow you
to map Private IP Addresses to Public IP Addresses for key services such as
Websites and FTP.
When finished making your changes on this screen, click the Save button
to save these changes.
Summary of Contents for ZSR0104CP
Page 1: ......