Cable/DSL Broadband Router w/4-Port Switch
31
Fill in the “Rule Name”, “Trigger Protocol”, "Trigger Port", " Forward
Protocol”, and “Forward Port” of the setting to be added and then click
"Add". Then this Special Application setting will be added into the "Current
Trigger-Port Table" below.
If you want to remove some Special Application settings from the " Current
Trigger-Port Table", select the Special Application settings you want to
remove in the table and then click "Delete ".
When finished making your changes on this screen, click the Save button
to save these changes.
4.6 Fire Wall
The Broadband Router provides extensive firewall protection by restricting
connection parameters to limit the risk of hacker attack, and defending
against a wide array of common hacker attacks. The Broadband Router
provides packet filtering rules by restricting service ports, IP address or
MAC address.
When finished making your changes on this screen, click the Save button
to save these changes.
4.6.1 MAC Filtering Configuration
You can block certain client PCs accessing the Internet based on MAC
addresses.
Figure 4-16
Status.
You can choose to turn on or turn off the Mac filtering
configuration by click start/stop button.
If checked, the undefined item in MAC Address list is allowed to access
Internet; Unchecked means reverse, Click “Apply” to save the setting.
MAC Address.
Enter the toggled physical address that to be allowed or
forbidden to access the Internet by select “permit” or “deny” in the
drop-down menu. Then click “add” button to finish the setting.
Summary of Contents for ZSR0104CP
Page 1: ......
