Cable/DSL Broadband Router w/4-Port Switch
22
4.2.1 For Dynamic IP Setting
Select “Dynamic IP User” button.
You can check the “Physical Address Clone” checkbox to copy the MAC
Address of your PC to be the MAC address of this device.
The MTU feature specifies the largest packet size permitted for network
transmission. Enter the value desired, for most Router users, it is
recommended to use1496. By default, MTU is set at1496.
Primary DNS and Secondary DNS, DNS (Domain Name System) Server
IP must be filled up when the ISP Provider provide these information to
you, if the ISP Provider provides Dynamic IP Address, then you can skip
on these dialog box.
Click “Apply” button then finish of setting.
Figure 4-6
NOTE:
Some ISPs may require you to register the MAC address of your
card/adapter .So It is recommended that the PC registered with the ISP
is used to setup the MAC Address Clone.
When finished making your changes on this screen, click the Save button
to save these changes.
4.2.2 For PPPoE Setting
Select “PPPoE User (ADSL)” button.
PPPoE Account and PPPoE Password, Enter the User Name and
Password provided by your ISP.
You can check the “Physical Address Clone” checkbox button to copy
the MAC Address of your PC to be the MAC address of this device.
The MTU feature specifies the largest packet size permitted for network
transmission. Enter the value desired, for most DSL users, it is
recommended to use1492. By default, MTU is set at 1492.
Primary DNS and Secondary DNS, DNS (Domain Name System) Server
IP must be filled up when the ISP Provider provide these information to
you, if the ISP Provider provides Dynamic IP Address, then you can skip
on these dialog box.
Summary of Contents for ZSR0104CP
Page 1: ......
