Cable/DSL Broadband Router w/4-Port Switch
33
Status.
You can choose to turn on or turn off the Connection Filtering
Configuration by click start/stop button.
If checked, the undefined item in IP Address list is allowed to access
Internet; Unchecked means reverse.
Rule Name:
Enter any name you want to use for the Application Name.
Source IP address:
Enter the IP address that you wish to apply this
Access Control rule.
Protocol.
Select the protocol type (TCP, UDP, FTP, HTTP).
Destination Port.
You can assign up to a port number or a port range.
The router will block clients from accessing Internet services that use
these ports.
Days To Block,
Chose days to block
Times To Block,
Chose time to block.
Current Access Control Table:
This display shows the valid Current
Access Control rules in Broadband Router. User can view the
information about Current Access Control Table.
Fill in the all of the setting to be added and then click "Add". Then this
Special Application setting will be added into the "Current Trigger-Port
Table" below.
If you want to remove some Special Application settings from the "Current
Access Control Table", select the Special Application settings you want to
remove in the table and then click "Delete ".
When finished making your changes on this screen, click the Save button
to save these changes.
4.6.3 URL Filtering Configuration
You can enter keywords specific to the site in these fields. The Router will
block access to sites that use those keywords.
NOTE:
You can use wildcards (*and?); "*" is the multi-letters; "?" is a letter;
For example:*.*sex*.* express that all URL with "sex" will be blocked!
Figure 4-18
Summary of Contents for ZSR0104CP
Page 1: ......
