Cable/DSL Broadband Router w/4-Port Switch
39
5. Troubleshooting
Q1 Forget Password (Reset the Router without Login)
1.
Use a pencil to press and hold the default button on the front
panel of the Router for 3~5 seconds.
2.
Plug out the power of the Router, wait for 5 seconds, and
then plug in again.
After the above two steps, the manufacture’s parameters will be restored
in the Router. The default password is admin.
Q2 Problems Related to Connection with Cable Modem
Please follow the following steps to check the problems:
1.
Check whether the Cable modem works well or the signal is
stable. Normally there will be some indicator lights on the
modem, users can check whether the signal is ok or the
modem works well from those lights. If not, please contact
the ISP.
2.
Check the front panel of the Router, there are also 7 indicator
lights there. When the physical connection is correct, the
Power light and the CPU light should be solid , the WAN light
should be blinking. If you use your computer, the
corresponding LAN port light should be blinking too. If not,
please check whether the cables work or not. If cables work,
please follow the steps in 11.1 Forget Password (Reset the
Router without Login) to reset the Router. Check whether
you can access the Internet, if not, go to step 3.
3.
Open an Internet Explorer (or other web browser), type
“192.168.10.1” in the address bar, and then press “Enter”.
4.
Input “admin” for the User Name, and “admin” for the
Password, and then press OK.
Summary of Contents for ZSR0104CP
Page 1: ......
