Cable/DSL Broadband Router w/4-Port Switch
23
Auto disconnect when idle. You can configure the Router to cut your
connection with your ISP after a specified period of time (Max Idle
Time). If you have been disconnected due to inactivity, Connect to
Internet manually, It enables the Router to automatically re-establish
your connection as soon as you attempt to access the Internet again. If
you wish to activate Connect on Demand, click the “Connect” button. If
you want your Internet connection to remain on at all times, You can
check the Connect to Internet automatically checkbox. The default
setting for Router is Connect to Internet automatically.
Click “Apply” button then finish of setting.
Figure 4-7
When finished making your changes on this screen, click the Save button
to save these changes.
4.2.3 For Static IP Setting
Input the IP Address sub mask ,Primary DNS , Secondary DNS and
Gateway provided by your ISP.
You can check the “Physical Address Clone” checkbox button to copy
the MAC Address of your PC to be the MAC address of this device.
The MTU feature specifies the largest packet size permitted for network
transmission. Enter the value desired, for most Router users, it is
recommended to use1496. By default, MTU is set at 1496 Primary DNS
and Secondary DNS, If your ISP provided at least one DNS Server IP
Address, type that IP Address in the Primary DNS address fields. You
can type up to another DNS Server IP Addresses. The Router will utilize
these for quicker access to functioning DNS Servers.
Click “Apply” button then finish of setting.
Summary of Contents for ZSR0104CP
Page 1: ......