ZOLL AutoPulse NXT, User Manual

Page: 35 / 85

Chapter 6. Battery Charger
30 www.zoll.com
1. Make sure the charging bay is clear of debris or obstructions.
2. Insert the battery, connector first, into the charging bay until it properly latches into position (Figure 6.3).
Caution. Do not slam the battery into the battery charger. This may cause damage to the battery and bat -
tery charger.
The battery charger automatically detects the battery and starts the charge cycle.
Figure 6.3. Batteries in the battery charger
Removing the battery
To maximize the battery’s charge, do not remove the battery from the battery charger until
charging completes. See Table
6.1 on page 32 .
To remove the battery:
1. Pull out the finger ring and rotate clockwise to the unlock position.
2. Pull the battery out of the battery charger.
Note. Newly-charged batteries can be warm to the touch. This is normal.
Figure 6.4. Removing the battery from the battery charger
Charging the battery
To charge the battery: